Level 2 EV Charger Installation · Ocala, FL

Home EV charging, professionally installed.

Level 2 EV charger installation for Tesla, ChargePoint, Wallbox, and any J1772-compatible charger. Load calc, permit, dedicated 240V circuit, wall-mount install, GFCI where required, and a full hand-off.

Get an EV Charger Quote Call (352) 291-0909

Tesla Wall Connector ChargePoint · Wallbox J1772 Compatible Permit & Inspection

Home Level 2 EV charger mounted in an Ocala garage

240V Circuit

Faster charging

What's Included

A complete, code-first EV install.

Every EV charger install includes electrical assessment, permit filing where required, a dedicated 240V circuit, mounting, GFCI protection where code requires it, and a hand-off with testing.

Every EV charger install includes:

Load calculation
We measure your existing electrical load so the new circuit is safe and code-compliant.
Permit filing
We pull the local permit and schedule inspection where required.
Dedicated 240V circuit
A proper double-pole breaker and correctly-sized conductors — no shared circuits.
Wall-mount install
Cleanly secured to studs or masonry, cord managed, cable at the right height.
GFCI where required
Ground-fault protection installed per current NEC requirements for your setup.
Hand-off & test
We verify the unit is charging correctly and walk you through the app / settings.

Chargers We Install

If it plugs into a wall, we can install it.

We routinely install every major Level 2 EV charger on the market. Bring your own hardware, or we'll help you pick the right one for your vehicle and panel.

Tesla Wall Connector

Tesla proprietary connector, up to 48A on a 60A circuit.

ChargePoint Home Flex

Flexible amperage settings, hardwired or plug-in.

Wallbox Pulsar Plus

Compact, smart, Wi-Fi & Bluetooth enabled.

Emporia

Value-focused Level 2 charger with load management.

Generic J1772

Any UL-listed J1772 charger works with any non-Tesla EV.

Panel Question

Do I need a panel upgrade?

Sometimes. A Level 2 EV charger pulls a lot of power on a dedicated 240V circuit. If your existing panel is at or near capacity — or you have a 100A service — you may need a panel upgrade before we can safely add the charger.

The good news: we run a load calculation before quoting. If your panel is fine, we'll tell you. If it isn't, we'll walk you through options like a service upgrade or load-management chargers that let you keep your current panel.

Learn about panel upgrades

Signs you might need a panel upgrade

Existing 100A main service
Federal Pacific, Zinsco, or old fuse panel
No open breaker slots
Already tight on load (AC + heat pump + pool + …)
Panel is corroded, burned, or generally aged out

What Drives Cost

Honest factors, no gimmicks.

Every home is different, so every quote is different. Here's what typically moves the number up or down — we'll walk through each with you on a free estimate.

Distance from panel

Longer runs mean more wire, more conduit, and more labor. Panel-to-garage installs are the fastest.

Permit fees

Marion County and municipal permit fees vary by jurisdiction — passed through at cost.

Panel capacity

If your panel is already full or under-sized, a sub-panel or service upgrade adds to scope.

Ready to charge at home?

Free EV charger estimates across Ocala & Marion County. Permits, load calcs, clean installs — done right.

Request Free Estimate Call (352) 291-0909

Call Now